Description
Antelco 13mm Single-Barbed End Plug
The Antelco 13mm Single-Barbed End Plug is used to terminate the end of a 13mm irrigation supply line. It provides a simple and reliable method of sealing the pipe to prevent water flow while allowing irrigation systems to be extended or modified in the future. Designed for standard 13mm LDPE irrigation pipe, the single-barbed connection provides quick push-fit installation. Manufactured in Australia from UV-stabilised engineering plastic, the fitting is suitable for long-term outdoor use in low-pressure garden irrigation systems. Antelco Part Number: 44555Features
- Terminates the end of a 13mm irrigation supply line.
- Single-barbed design allows quick push-fit installation.
- Provides a secure seal to prevent water escaping from the pipe.
- Manufactured from UV-stabilised engineering plastic.
- Designed for long-term outdoor service life.
- Designed and manufactured by Antelco in Australia.
Common Uses
- Sealing the end of a 13mm irrigation supply line.
- Closing off redundant or temporary pipe runs.
- Allowing irrigation systems to be expanded or altered at a later date.
- Garden irrigation, greenhouse and nursery watering systems.
Compatibility
- Suitable for standard 13mm ID (16mm OD) LDPE irrigation pipe.
- Compatible with Grow Insane, Antelco, Hozelock-compatible and most other standard 13mm irrigation systems.
- Designed for low-pressure irrigation applications.
Installation
- Cut the irrigation pipe cleanly and squarely using a sharp pipe cutter or suitable scissors.
- Push the pipe fully over the barb until firmly seated.
- Where additional pipe retention is required, fit a compatible 13mm ratchet clamp immediately behind the barb.
- Turn on the water supply and check the connection for leaks.
