13mm Pressure Regulated Dripline Kit

Quantity discounts
£29.95 each or less when buying in bulk
Quantity : 1 2-4 5-9 10+
Price : £29.95 £25.46 £23.96 £22.46
Savings : 0% 15% 20% 25%
This product is currently unavailable.
SKU: B-13mmDripKit35m Category:

Description

13mm Pressure Regulated Dripline Kit – Hosepipe ban friendly- Rainbird Pipe

eBay customers please note : THIS KIT IS NOT PART OF THE eBay £5 off £25 offer which covers connectors and emitters but excludes timers, pipe and kits.

Image

Quantity

Title

Description

10 Meters Rain Bird 13mm(ID)/16mm(OD) LDPE 13mm Black LDPE Water Pipe 4 Bar Rated This pipe is flexible, UV stabilised and will resist damage from frost during the winter months but you should be sure to drain the pipe as expanding water will cause damage, as it will with any fitting. The pipe can be installed on the surface or just below the surface. LDPE pipe is not suitable for deeper installation. This pipe should not be used to carry human drinking water. Made In USA
25 Meters Rain Bird 13mm(ID)/16mm(OD) XFD Pressure Regulated Dripling Dripline 25 Meters Rain Bird XFD Drip Line 16mm (13mm ID), pressure regulated drippers at 33cm intervals outputting 2.3 l/h The most flexible, pressure-compensating inline emitter tubing available to irrigate ground cover, dense plantings, hedge rows and more. Extra flexible tubing for fast, easy installation Made In USA Manufacturers Guide
X 1 Valve- 13mm – Female 3/4″ The female 3/4″ BSP connector is designed for connecting to 3/4″ fittings like a garden tap or other connector. The other end connects to the LDPE pipe. The BSP connector includes a rubber washer for a watertight fitting so PTFE tape is NOT required.  To ease fitting of the hose/pipe, please gently warm the pipe it’s being fitted into.  Please ensure you fit the valve tightly as the seal is only made at biting point.
X 10 13mm Tee These 13mm Tee Piece connectors are designed for standard irrigation pipe, hose, hozelock and 1/2″ porous pipe  16mm (Outter dimension pipe) with a 13mm (Inner dimension pipe) These items are triple barbed for extra water tightness and strength.  Warming the pipe/hose slightly will aid during attachment.
X 1 3/4″ Mesh Filter Washer Garden or Fresh Water Hose Washer with Mesh Screen Filter 3/4″ Filters debris before they enter your garden irrigation system.  Intended for use inside the 3/4″ tap connector included. Please note : We recommend the use of a dedicated filter to prolong the life of the system like :http://www.ebay.co.uk/itm/263466168949
X 10 13mm Straight Connector These straight/joiner 13mm connectors will allow you to switch between LDPE and the Dripline as needed.
X 3 13mm End Plug
End plug These 13mm line end connectors are designed as an end stop to your standard irrigation pipe and 1/2″ porous pipe  16mm (Outter dimension pipe) with a 13mm (Inner dimension pipe)
 
These items are triple barbed for extra water tightness and strength.  Most connectors are only double or single barbed.  Warming the pipe/hose slightly will aid during attachment.
X 10 13mm Elbow These 13mm elbow connectors are designed for standard irrigation pipe, hose, hozelock and 1/2″ porous pipe  16mm (Outter dimension pipe) with a 13mm (Inner dimension pipe) These items are triple barbed for extra water tightness and strength.  Warming the pipe/hose slightly will aid during attachment.
Please note, if you order multiple quantities of this kit you may receive the LDPE pipe in one single length of the total amount of pipe ordered.  If you prefer to receive separate lengths, please let us know after ordering. Please note this kit does not include hold down stakes or ratchet safety clamps which may aid in scenarios of higher water pressure or where the pipe is being laid in a way contrary to its natural sitting position.