Description
Antelco 14mm Green Back In-Line Valve
The Antelco 14mm Green Back In-Line Valve is used to control or isolate the flow of water through a 14mm irrigation supply line. Its quarter-turn handle provides a simple method of adjusting or shutting off water to individual irrigation zones, branches or watering circuits. Designed for standard 14mm irrigation pipe, the valve features barbed connections for quick push-fit installation. Manufactured in Australia from UV-stabilised engineering plastic, it is suitable for long-term outdoor use in low-pressure garden irrigation systems. Antelco Part Number: 45575Features
- Controls or isolates water flow within a 14mm irrigation supply line.
- Quarter-turn handle allows simple on/off operation and flow adjustment.
- Barbed connections allow quick push-fit installation.
- Manufactured from UV-stabilised engineering plastic.
- Designed for long-term outdoor service life.
- Designed and manufactured by Antelco in Australia.
Common Uses
- Isolating individual irrigation zones.
- Controlling water flow to garden beds or planting areas.
- Balancing flow between irrigation circuits.
- Garden irrigation, greenhouse and nursery watering systems.
Compatibility
- Suitable for standard 14mm irrigation pipe.
- Compatible with Grow Insane, Antelco and most other standard 14mm irrigation systems.
- Designed for low-pressure irrigation applications.
Installation
- Cut the irrigation pipe cleanly and squarely using a sharp pipe cutter or suitable scissors.
- Push each pipe end fully over the corresponding barb until firmly seated.
- Where additional pipe retention is required, fit compatible 14mm ratchet clamps immediately behind the barbs.
- Turn the valve to the required position, then turn on the water supply and check the connections for leaks.
