Description
Antelco 13mm Single-Barbed Tee
The Antelco 13mm Single-Barbed Tee is used to divide a 13mm irrigation supply line into two separate branches. Its compact T-shaped design provides a straightforward way to create additional watering zones or route irrigation pipe in different directions. Designed for standard 13mm LDPE irrigation pipe, each outlet features a single barb for quick push-fit installation. Manufactured in Australia from UV-stabilised engineering plastic, the fitting is suitable for long-term outdoor use in low-pressure garden irrigation systems. Antelco Part Number: 45035Features
- Creates a three-way connection in 13mm irrigation pipe.
- Single-barbed outlets allow quick push-fit installation.
- Compact design suitable for branching irrigation supply lines.
- Manufactured from UV-stabilised engineering plastic.
- Designed for long-term outdoor service life.
- Designed and manufactured by Antelco in Australia.
Common Uses
- Dividing a main irrigation line into two branches.
- Creating separate watering zones.
- Routing pipe to different garden beds or planting areas.
- Garden irrigation, greenhouse and nursery watering systems.
Compatibility
- Suitable for standard 13mm ID (16mm OD) LDPE irrigation pipe.
- Compatible with Grow Insane, Antelco, Hozelock-compatible and most other standard 13mm irrigation systems.
- Designed for low-pressure irrigation applications.
Installation
- Cut the irrigation pipe cleanly and squarely using a sharp pipe cutter or suitable scissors.
- Push each pipe end fully over the corresponding barb until firmly seated.
- Where additional pipe retention is required, fit compatible 13mm ratchet clamps immediately behind the barbs.
- Turn on the water supply and check each connection for leaks.
