Emitter Spike – Shrubbler 180 Spike with 4mm Barb + Adaptor

£0.66

In stock

Quantity discounts
£0.66 each or less when buying in bulk
Quantity : 1-24 25-49 50-99 100+
Price : £0.66 £0.53 £0.50 £0.46
Savings : 0% 20% 24% 30%
SKU: S-Antelco-31295-Shrubbler180Spike Category: Tags: , , , , , , , , ,

Description

Antelco Shrubbler® 180° Spike with 4mm Adaptor

The original patented Antelco Shrubbler® provides fully adjustable 180° watering for borders, planter boxes and areas where a half-circle spray pattern is required. Supplied pre-fitted to a sturdy ground stake with a 4mm adaptor, it installs quickly at the end of a 4mm micro irrigation line. Fingertip flow control allows the water output to be adjusted from shut-off, through drip irrigation, to a gentle 180° spray pattern. Manufactured in Australia from UV-stabilised materials, the Shrubbler® is designed for reliable long-term outdoor use. Antelco Part Number: 31295
See It In Action
See how the Antelco Shrubbler® adjusts from shut-off, through drip irrigation, to a controlled 180° spray pattern.
Watch the Antelco 180° Shrubbler demonstration video on YouTube

Video opens on YouTube in a new window

Features
  • Original patented Antelco Shrubbler®.
  • Antelco Part Number: 31295.
  • 180° adjustable spray pattern.
  • Supplied on a sturdy ground stake with 4mm adaptor.
  • Fingertip flow control from shut-off, through drip irrigation, to a 180° spray pattern.
  • Flow rate up to approximately 33 litres per hour at 1 bar.
  • Approximately 40cm spray diameter at 1 bar.
  • Manufactured from UV-stabilised materials for long outdoor service life.
  • Designed and manufactured by Antelco in Australia.
Common Uses
  • Garden borders and edge planting.
  • Planter boxes and raised beds.
  • Pots and large containers positioned against walls or fences.
  • Greenhouses and nurseries.
  • Applications requiring watering in a single direction without overspray behind the emitter.
Compatibility
  • Supplied with a 4mm adaptor for installation at the end of standard 4mm ID (6mm OD) micro irrigation pipe.
  • Compatible with Antelco, Grow Insane, Hozelock and most other 4mm micro irrigation systems.
Installation
  1. Push the 4mm adaptor fully into standard 4mm ID (6mm OD) micro irrigation pipe.
  2. Position the ground stake securely in the soil with the open side of the emitter facing the area to be watered.
  3. Turn on the water supply.
  4. Rotate the cap to adjust the water output from shut-off, through drip irrigation, to the required 180° spray pattern.
  5. Fine-tune the direction and water output to suit the watering area.

Additional information

Weight 5.428 kg