CFd DownSpray – 0.9MM – BROWN

Description

Antelco CFd® DownSpray 0.9mm – Brown

The Antelco CFd® DownSpray is a fixed-pattern 360° downwards spray jet designed to distribute water evenly across the wetted surface while reducing the effects of wind. Its patented C-Frame design produces a gentle downward spray that helps minimise damage to delicate foliage, making it well suited to nurseries, orchards, pot plants and landscaped gardens.

The single-piece construction has no moving parts for reliable operation, while the Quick-Thread inlet with sealing barb allows fast installation into compatible threaded adaptors and risers. Manufactured in Australia from UV-stabilised engineering plastic, the CFd® DownSpray is designed for dependable long-term outdoor use.

Antelco Part Number: 19025

See the Antelco CFd® DownSpray range in operation.

Video opens on YouTube in a new window

• Fixed-pattern 360° downwards spray jet.
• Antelco Part Number: 19025.
• 0.9mm brown nozzle for easy flow-rate identification.
• Patented C-Frame design.
• 45° downwards spray pattern helps reduce the effects of wind.
• Gentle spray helps minimise damage to delicate plant foliage.
• Flow rate of approximately 29 litres per hour at 100 kPa (1 bar).
• Approximate spray diameter of 0.5 metres when installed on a 250mm riser at 100 kPa.
• Quick-Thread inlet with integral sealing barb for rapid installation.
• No moving parts for dependable operation and low maintenance.
• Manufactured from UV-stabilised engineering plastic for long outdoor service life.
• Designed and manufactured by Antelco in Australia.

• Nurseries.
• Orchards.
• Pot plants.
• Home and landscaped gardens.
• Applications requiring a gentle 360° downward spray pattern.

• Quick-Thread inlet for installation into compatible threaded adaptors and risers.
• Compatible with Antelco Asta^® Stakes, galvanised wire stake assemblies and other compatible Quick-Thread irrigation fittings.
• Compatible with Antelco, Grow Insane and other irrigation systems using compatible Quick-Thread fittings.

1. Install the DownSpray into a compatible threaded adaptor, stake assembly or riser.
2. Position the spray head vertically above the area to be irrigated.
3. Turn on the water supply.
4. Check that the spray pattern provides the required coverage.
5. Inspect periodically and clean if debris affects the spray pattern.