Description
Antelco Spectrum™ 360 Adjustable Spray with 4mm Barb
The Antelco Spectrum™ 360 Adjustable Spray is a full-circle vortex sprayer designed to provide adjustable irrigation for pots, tubs, landscaped gardens, nurseries and ground cover. The integral 4mm barb allows the emitter to be connected directly to standard 4mm micro irrigation tube or feeder lines for flexible installation. The click-indexed cap allows both flow rate and spray diameter to be adjusted with fingertip control, including a full shut-off position. Producing fine water droplets for even coverage, the Spectrum™ spray is manufactured from UV-stabilised engineering plastic and designed and manufactured by Antelco in Australia for reliable long-term outdoor use. :contentReference[oaicite:0]{index=0} Antelco Part Number: 32045See It In Action
See the Antelco Spectrum™ Adjustable Spray range in operation.
Video opens on YouTube in a new window
Features
- Adjustable full-circle (360°) vortex spray emitter.
- Antelco Part Number: 32045.
- Integral 4mm barb for direct connection to standard 4mm micro irrigation tube.
- Finger-tip click-indexed flow control with a positive shut-off option.
- Flow and spray coverage are adjusted by rotating the cap.
- Produces fine water droplets for even irrigation coverage.
- Maximum flow rate of approximately 64 litres per hour at 100 kPa (1 bar).
- Maximum spray diameter of approximately 2.8 metres at 100 kPa (1 bar).
- Removable cap for easy inspection and cleaning.
- Manufactured from UV-stabilised engineering plastic for long outdoor service life.
- Designed and manufactured by Antelco in Australia.
Common Uses
- Pots and containers.
- Tubs and planters.
- Ground cover.
- Landscaped gardens.
- Nurseries.
- Watering larger garden areas when used with compatible Antelco Asta® Stakes and risers.
Compatibility
- Integral 4mm barb for direct connection to standard 4mm micro irrigation tube.
- Compatible with Antelco, Grow Insane and other compatible 4mm micro irrigation systems.
Installation
- Push the integral 4mm barb fully into the end of the 4mm micro irrigation tube.
- Position the emitter where irrigation is required, or install into a compatible support if desired.
- Turn on the water supply and rotate the cap to achieve the required flow rate and spray diameter.
- Rotate the cap fully closed when the emitter is not required.
- Remove the cap periodically for inspection and cleaning if necessary.
