Description
Antelco Spectrum™ 360 Adjustable Spray with 4mm Thread
The Antelco Spectrum™ 360 Adjustable Spray is a full-circle vortex sprayer designed to provide adjustable irrigation for pots, tubs, landscaped gardens, nurseries and ground cover. The 4mm threaded inlet (10-32 UNF) allows the emitter to be installed directly into compatible Antelco Rigid Risers, Asta® Stakes and Micro Stake Assemblies. The click-indexed cap allows both flow rate and spray diameter to be adjusted with fingertip control, including a full shut-off position. Producing fine water droplets for even coverage, the Spectrum™ spray is manufactured from UV-stabilised engineering plastic and designed and manufactured by Antelco in Australia for reliable long-term outdoor use. :contentReference[oaicite:0]{index=0} Antelco Part Number: 32015See It In Action
See the Antelco Spectrum™ Adjustable Spray range in operation.
Video opens on YouTube in a new window
Features
- Adjustable full-circle (360°) vortex spray emitter.
- Antelco Part Number: 32015.
- 4mm threaded inlet (10-32 UNF) for installation into compatible irrigation fittings.
- Finger-tip click-indexed flow control with a positive shut-off option.
- Flow and spray coverage are adjusted by rotating the cap.
- Produces fine water droplets for even irrigation coverage.
- Maximum flow rate of approximately 64 litres per hour at 100 kPa (1 bar).
- Maximum spray diameter of approximately 2.8 metres at 100 kPa (1 bar).
- Removable cap for easy inspection and cleaning.
- Manufactured from UV-stabilised engineering plastic for long outdoor service life.
- Designed and manufactured by Antelco in Australia.
Common Uses
- Pots and containers.
- Tubs and planters.
- Ground cover.
- Landscaped gardens.
- Nurseries.
- Watering larger garden areas when installed with compatible Antelco Asta® Stakes, Micro Stake Assemblies and Rigid Risers.
Compatibility
- 4mm threaded inlet (10-32 UNF).
- Compatible with Antelco Asta® Stakes, Asta® Stake Adaptors, Micro Stake Assemblies and Rigid Risers.
- Suitable for Antelco, Grow Insane and other irrigation systems using compatible 10-32 UNF threaded fittings.
Installation
- Screw the threaded emitter into a compatible 10-32 UNF irrigation fitting by hand.
- Position the emitter above the area to be irrigated.
- Turn on the water supply and rotate the cap to achieve the required flow rate and spray diameter.
- Rotate the cap fully closed when the emitter is not required.
- Remove the cap periodically for inspection and cleaning if necessary.
