Description
Antelco Shrubbler® 360° In-Line Spike
The original patented Antelco Shrubbler® provides fully adjustable 360° watering for individual plants, containers and planter boxes. Supplied pre-fitted to a sturdy in-line ground stake with 4mm inlet and outlet connections, it is designed to be installed directly into a 4mm micro irrigation line, allowing additional emitters to be connected further along the tube. Fingertip flow control allows the water output to be adjusted from shut-off, through drip irrigation, to a gentle full-circle spray pattern. Manufactured in Australia from UV-stabilised materials, the Shrubbler® is designed for reliable long-term outdoor use. Antelco Part Number: 30995See It In Action
See how the Shrubbler® adjusts from shut-off, through drip irrigation, to a full 360° spray pattern.
Video opens on YouTube in a new window
Features
- Original patented Antelco Shrubbler®.
- Antelco Part Number: 30995.
- Supplied on a sturdy in-line ground stake with 4mm inlet and outlet connections.
- Allows additional emitters to be connected further along the same 4mm micro irrigation line.
- Fingertip flow control from shut-off, through drip irrigation, to a full 360° spray pattern.
- Flow rate up to approximately 49 litres per hour at 200kPa (2.0 bar), depending on adjustment.
- Approximately 0.9 metre spray diameter at 200kPa (2.0 bar), depending on adjustment.
- Manufactured from UV-stabilised materials for long outdoor service life.
- Designed and manufactured by Antelco in Australia.
Common Uses
- Planter boxes and troughs.
- Pots, containers and hanging baskets.
- Garden borders and landscaped areas.
- Greenhouses and nurseries.
- Installations where several Shrubbler® emitters are connected along a single 4mm micro irrigation line.
Compatibility
- Designed for installation directly into standard 4mm ID (6mm OD) micro irrigation pipe.
- In-line design allows 4mm micro pipe to be connected to both the inlet and outlet.
- Compatible with Grow Insane, Antelco, Hozelock and most other standard 4mm micro irrigation systems.
Installation
- Cut the 4mm micro irrigation pipe at the desired installation point.
- Push the inlet and outlet barbs fully into each end of the 4mm micro pipe.
- Position the ground stake securely in the soil close to the plant.
- Turn on the water supply and check for leaks.
- Rotate the cap to adjust the flow from shut-off, through drip irrigation, to a full 360° spray pattern.
