Valve – 19mm Barbed – In-Line – Green Back

Description

Antelco 19mm Green Back In-Line Valve

The Antelco 19mm Green Back In-Line Valve is used to control or isolate the flow of water through a 19mm irrigation supply line. Its quarter-turn handle provides a simple method of adjusting or shutting off water to individual irrigation zones, branches or watering circuits. Designed for standard 19mm LDPE irrigation pipe, the valve features barbed connections for quick push-fit installation. Manufactured in Australia from UV-stabilised engineering plastic, it is suitable for long-term outdoor use in low-pressure garden irrigation systems. Antelco Part Number: 45525

• Controls or isolates water flow within a 19mm irrigation supply line.
• Quarter-turn handle allows simple on/off operation and flow adjustment.
• Barbed connections allow quick push-fit installation.
• Manufactured from UV-stabilised engineering plastic.
• Designed for long-term outdoor service life.
• Designed and manufactured by Antelco in Australia.

• Isolating individual irrigation zones.
• Controlling water flow to garden beds or planting areas.
• Balancing flow between irrigation circuits.
• Garden irrigation, greenhouse and nursery watering systems.

• Suitable for standard 19mm LDPE irrigation pipe.
• Compatible with Grow Insane, Antelco, Hozelock-compatible and most other standard 19mm irrigation systems.
• Designed for low-pressure irrigation applications.

1. Cut the irrigation pipe cleanly and squarely using a sharp pipe cutter or suitable scissors.
2. Push each pipe end fully over the corresponding barb until firmly seated.
3. Where additional pipe retention is required, fit compatible 19mm ratchet clamps immediately behind the barbs.
4. Turn the valve to the required position, then turn on the water supply and check the connections for leaks.