CFa AgSpray – 1.0MM – BLUE

Description

Antelco CFa AgSpray 1.0mm – Blue

The Antelco CFa AgSpray is a fixed-pattern 360° stream spray jet engineered to provide reliable, high-performance irrigation for orchards, vineyards and horticultural crops. Its single-piece construction and robust ‘C’ frame design provide dependable operation with no moving parts, making it suitable for demanding outdoor environments.

The 1.0mm blue nozzle produces a 12-stream Hi-Lo watering pattern, providing even water distribution over a wide area. The Quick-Thread inlet with an integral sealing barb allows rapid installation into compatible threaded adaptors and risers. Manufactured in Australia from UV-stabilised engineering plastic, the CFa AgSpray is designed for reliable long-term outdoor use.

Antelco Part Number: 13015

See the Antelco CFa AgSpray range in operation.

Video opens on YouTube in a new window

• Single-piece 360° stream spray jet.
• Antelco Part Number: 13015.
• 1.0mm blue nozzle for easy flow-rate identification.
• 12-stream Hi-Lo watering pattern for uniform water distribution.
• Flow rate of approximately 33 litres per hour at 1 bar.
• Approximately 4.2 metre high trajectory spray diameter at 1 bar.
• Robust proven ‘C’ frame design.
• No moving parts for dependable operation and low maintenance.
• Quick-Thread inlet with integral sealing barb for rapid installation.
• Manufactured from UV-stabilised engineering plastic for long outdoor service life.
• Designed and manufactured by Antelco in Australia.

• Orchards.
• Vineyards.
• Horticultural crops.
• Tree crops.
• General agricultural irrigation requiring 360° stream coverage.

• Quick-Thread inlet for installation into compatible threaded adaptors and risers.
• Compatible with Antelco Asta^® Stakes, Rigid Risers and other compatible threaded irrigation fittings.
• Compatible with Antelco, Grow Insane and other irrigation systems using compatible Quick-Thread fittings.

1. Install the AgSpray into a compatible threaded adaptor or rigid riser.
2. Position the spray jet vertically to achieve the intended spray pattern.
3. Turn on the water supply.
4. Check that the spray pattern provides the required coverage.
5. Inspect periodically and clean if debris affects the spray pattern.