PC Dripper Spike – Ceta 4L/h 4mm In-Line

Description

Antelco CETA® Pressure Compensating In-Line Spike 4 L/h – Black

The Antelco CETA® Pressure Compensating In-Line Spike is designed to deliver a consistent flow of water directly to the plant root zone across a wide range of operating pressures. The integrated ground spike anchors the dripper securely beside the plant, while the in-line connections allow it to be installed directly into 4mm micro irrigation tube. The pressure compensating design helps maintain a uniform discharge rate throughout the irrigation system. The take-apart body allows easy inspection and cleaning, while the self-flushing flow path and integrated insect baffle help minimise blockages. Manufactured in Australia from UV-stabilised materials, it is designed for reliable long-term outdoor use. Antelco Part Number: 30655 See the Antelco CETA® Pressure Compensating Dripper range in operation.

• Pressure compensating in-line spike dripper delivering a nominal flow rate of 4 litres per hour.
• Antelco Part Number: 30655.
• Black body identifies the 4 L/h flow rate.
• Integrated spike secures the dripper adjacent to the plant.
• In-line barbed connections for use with standard 4mm micro irrigation tube.
• Take-apart design for easy inspection and cleaning.
• Self-flushing flow path with integrated insect baffle helps minimise blockages.
• Pressure compensating design provides a consistent flow over a wide range of operating pressures.
• Manufactured from UV-stabilised engineering plastic for long outdoor service life.
• Designed and manufactured by Antelco in Australia.

• Pots and containers.
• Planter boxes.
• Balconies and patios.
• Landscape irrigation.
• Applications requiring precise root-zone watering using 4mm micro irrigation tube.

• Designed for installation directly into standard 4mm micro irrigation tube.
• Suitable for use with Antelco, Grow Insane and other compatible 4mm micro irrigation systems.

1. Cut the 4mm micro irrigation tube at the required location.
2. Push the inlet and outlet barbs fully into each end of the tube.
3. Position the spike securely beside the plant.
4. Turn on the water supply and confirm correct operation.
5. If required, unscrew the take-apart body periodically for inspection and cleaning.