Description
Antelco Mini Bubbler™ 360 Adjustable Threaded Emitter
The Antelco Mini Bubbler™ 360 Adjustable Threaded Emitter is designed to provide gentle, localised irrigation using an umbrella-style watering pattern. The 4mm threaded inlet (10-32 UNF) allows the emitter to be installed directly into compatible Antelco Rigid Risers, Asta® Stakes and Micro Stake Assemblies.
The click-indexed cap allows both flow rate and coverage to be adjusted with fingertip control, including a full shut-off position. Manufactured from UV-stabilised engineering plastic, the Mini Bubbler™ is designed and manufactured by Antelco in Australia for reliable long-term outdoor use. :contentReference[oaicite:0]{index=0}
Antelco Part Number: 31715
See the Antelco Mini Bubbler™ range in operation.
Video opens on YouTube in a new window
- Adjustable 360° Mini Bubbler™ with gentle umbrella watering pattern.
- Antelco Part Number: 31715.
- 4mm threaded inlet (10-32 UNF) for installation into compatible irrigation fittings.
- Finger-tip flow control with a positive shut-off option.
- Flow and coverage are adjusted by rotating the cap.
- Maximum flow rate of approximately 100 litres per hour at 100 kPa (1 bar).
- Approximate spray radius of 0.2 metres at 100 kPa (1 bar).
- Designed for installation into Antelco Rigid Risers, Asta® Stakes and Micro Stake Assemblies.
- Manufactured from UV-stabilised engineering plastic for long outdoor service life.
- Designed and manufactured by Antelco in Australia.
- Street trees.
- Shrubs.
- Landscape planting.
- Applications requiring gentle, localised watering with short irrigation times.
- 4mm threaded inlet (10-32 UNF).
- Compatible with Antelco Asta® Stakes, Asta® Stake Adaptors, Micro Stake Assemblies and Rigid Risers.
- Suitable for Antelco, Grow Insane and other irrigation systems using compatible 10-32 UNF threaded fittings.
- Screw the Mini Bubbler™ into a compatible 10-32 UNF threaded fitting by hand.
- Position the emitter above the area to be irrigated.
- Turn on the water supply and rotate the cap to achieve the required flow rate and watering coverage.
- Rotate the cap fully closed when the emitter is not required.
- Inspect periodically and clean if debris affects performance.
